"The Perfect DIY Ring Light When Your Just Getting Started"
When I first launched this blog the idea was to share every single thing that I learn on this online journey. With still such a long way to go I continue to read, take notes and watch YouTube videos. I wanna stay on that very same path. I wanna continue to keep learning and keep sharing.
Besides this blog, buying a camera is one of my best investments so far. I’m no photographer by any means. But I do like taking pretty pictures. I do think I’m much better behind the camera than in front of the camera. But ya know to each its own!
With any camera rather a digital camera of your phone’s camera, we all know how important lighting is when it comes to taking a photo. Photography is all about light. Some good lighting can really make a difference in the outcome of your photo. Some photographers only shoot at a certain time of the day known as – The Golden Hour.
I usually use natural daylight when taking my photos. Thats the best light if you ask me – but then again remember I’m no photographer.
Because I do work a full time job and blog on the side, my normal routine is to take all photos on the weekdays after 5 PM always. Well guess what with the time change, it’s now dark when I get off work so I needed a plan b for good lighting.
I decided to make a DIY (do it yourself) ring light. So if you just started a blog here is a great way to make your photos look even better. Or maybe you take your own photos for your online store, or you’re a makeup artist wanting better light for your models. This DIY is for you. Main items are purchased from amazon. I will leave links below.
What You Need – Supplies
1. Card board, you can use an old box
3. Packing Tape
5. Scissors or Box Cutter Note: The box cutter makes cutting the box easy
8. Aluminum Foil
9. Wax Paper
What To Do
1. Use the pencil and trace the outer and inner parts of the wreath wire frame onto your card board. The Circle does not have to be perfect. If your cardboard is dark maybe go over it twice.
2. Go ahead and cut it out. Cut out the outer part inner parts of the circle. (see photo) The box cutter makes the cutting party easy, but please be careful. Use scissors if there is no box cutter.
3. Use the aluminum foil and wrap all the way around your cut out card board. Cover with aluminum foil completely. The light will bounce off of the aluminum and shine more on what being photographed or videoed.
4. Use your cable ties and tie the wreath wire frame to the cut out card board.
5. Tie the rope light to wreath wire frame using your plastic cable ties. Start by wrapping the rope on the outer portion and work your way in. You’ll end up with 3 or 4 rows of lights. Use the plastic cable ties to hold as your wrap round. I used about 27 ties total. Make sure you leave out the part of the light rope that plugs into the wall, no need to tie that down.
6. Cut off any access (the part that sticks out) be careful because after you cut the plastic cable ties they’re very sharp at the tip.
7. Take your wax paper and wrap it around the entire fixture. Tape it down in the back. Clear tape looks better, but all I had was red tape so I made it work.
Plug the light up and use it for your photos and or videos. It makes a huge difference, trust me. Try making your own.
How has lighting upgraded your photos or videos? Do you notice a difference? Try making this DIY Ring light and send me a few photos. Do you think this ring light would come in handy?